The short answer: most homeowners pay between $163 and $538 for a typical electrician visit, and the average is about $351, according to Angi’s cost guide, updated August 3, 2026. Licensed electricians usually charge $50 to $130 an hour, and many add a service call fee of $100 to $200 that covers the first hour. So how much does an electrician cost for your job? It depends on what needs doing, when you need it done and how hard the wiring is to reach.
Those are national figures, not our prices. This guide breaks down hourly rates, service call fees and minimums, what common jobs cost, what electrical permits cost in the City of Abilene, and how to get a price you can trust before any work starts.

How Much Do Electricians Charge per Hour?
Angi and HomeAdvisor (updated June 19, 2026) both put a licensed electrician at $50 to $130 an hour. The rate climbs with the electrician’s license level:
| License level | Typical hourly rate (Angi and HomeAdvisor, 2026) |
|---|---|
| Apprentice | $40 to $60 |
| Journeyman | $60 to $90 |
| Master electrician | $90 to $120 |
Another cost site, Fixr, puts the average hourly rate at $70 to $131 (updated January 31, 2025). Location matters too. Angi says electricians in cities often charge $100 or more an hour, while rural rates can sit around $50, though rural pros may add a travel fee.
Why does a master electrician cost more? In Texas, a master license requires 12,000 hours of on-the-job training under a Texas master electrician and at least two years holding a journeyman license before the exam (TDLR). That experience is what you are paying for when a job needs careful diagnosis or panel work.
The rate a contractor bills is also not the same as what the electrician takes home. The U.S. Bureau of Labor Statistics puts the median wage for electricians at $30.38 an hour as of May 2025 (BLS). The billed rate has to cover more than wages, including the vehicle, tools, insurance and licensing. For example, a Texas electrical contractor must employ a licensed master electrician and carry liability insurance of at least $300,000 per occurrence (TDLR).
Service Call Fees, Trip Charges and Minimums
Many electricians charge a set fee just to come out. Angi and HomeAdvisor put the service call fee at $100 to $200 for the first hour, and Angi says the first hour averages about $150. Many pros also set a minimum of one to four hours of labor, no matter how short the job is.
That is why a five-minute fix can cost more than you expect, and why it pays to group small jobs into one visit. If you have a dead outlet, a switch to replace and a light fixture to hang, one visit for all three means you pay the call fee and the minimum once instead of three times. Before you book, ask:
- Is the job priced by the hour or as a flat price?
- What does the service call fee cover, and is it credited toward the repair?
- Is there a minimum charge, and what happens if the job runs longer than expected?
Nights, weekends and emergencies cost more. HomeAdvisor says after-hours work runs time-and-a-half to double the standard rate. Angi says nights and weekends can add $100 to $200, and emergency visits can cost double the standard hourly rate. If the problem is not dangerous, waiting for regular hours can save money. If you smell burning, see sparks, or an outlet or panel feels hot, do not wait: turn off the breaker if you can do it safely and call an electrician. If you see smoke or flames, get out and call 911.
What Common Electrical Jobs Cost
HomeAdvisor lists these national ranges for common jobs. Your price depends on the fixture or device you choose, the condition of the wiring and how easy it is to reach.
| Job | Typical range (HomeAdvisor, June 2026) | More information |
|---|---|---|
| Outlet installation | $200 to $300 | Outlet and switch repair |
| Light switch installation | $85 to $200 | Outlet and switch repair |
| Ceiling fan installation | $140 to $350 | Lighting installation |
| Light fixture installation | $155 to $955 | Lighting installation |
| Electrical inspection | $100 to $125 | When to call an electrician |
| Replacing a breaker panel | $520 to $2,120 | Electrical panel upgrades |
| Electrical panel upgrade | $1,200 to $2,000 | Electrical panel upgrades |
Bigger projects have their own cost guides. See how much it costs to rewire a house and how much it costs to install an EV charger.

Electrical Permit Costs in Abilene
Angi puts a typical building permit at $75 to $150. Inside Abilene city limits, the City’s fee schedule (checked October 2026) lists these electrical permit fees:
- Minimum electrical permit fee: $75
- New outlets, switches, ceiling fans and similar, up to 50: $75
- New or upgraded service, including rewires and upgrades: $100 up to 200 amps, $150 for 201 to 400 amps, $200 for 401 amps and up
- Temporary service or power pole: $75
- Solar panel or wind turbine installation: $400
Whether your job needs a permit depends on the work, so ask your electrician and ask whether the permit fee is in the quote. For questions, the City’s Building Inspections office is at 555 Walnut Street, (325) 676-6232. If your home is outside Abilene city limits, those City fees do not apply, so check with your own city or county.
What Affects the Price of Electrical Work
- The type and size of the job. Replacing a switch is a short visit. Adding a circuit or upgrading a panel takes longer and uses more material.
- Access. Angi notes that hard-to-reach panels, wiring or fixtures can make a job take longer. Finished walls, tight attics and crawl spaces all add labor.
- License level. A master electrician costs more per hour than a journeyman or an apprentice.
- Timing. Nights, weekends and emergency calls cost more than regular hours.
- Travel. Angi says rural pros may add travel fees. If you live outside town, ask whether one applies.
- Permits and inspections. Angi says these are required for more complex work, and the fees add to the total.
- The age of the house. Older wiring can turn a simple job into a bigger one once the electrician opens a box. Our guide to types of wiring in old houses explains what to look for.
How Much Does an Electrician Cost for Your Job? Getting an Accurate Quote
National averages are a starting point. The only number that counts for your home is a quote based on the actual work. These steps help you get one you can compare:
- Describe the problem clearly. Say what happens, when it started and which rooms are affected. A photo of the panel label helps.
- Ask how the job is priced. Flat price or hourly, the call fee, any minimum, and whether the call fee counts toward the repair.
- Ask what is included. Materials, the permit and any drywall patching are sometimes quoted separately.
- Get the price before work starts. A clear price up front avoids surprises on the bill.
- Check the license. TDLR says anyone who performs electrical work in Texas must be licensed, with certain exemptions. You can look up any electrician or contractor on TDLR’s license search.
We offer free estimates and upfront pricing, which means you approve the price before any work starts. Our licensed electricians work under a Texas electrical contractor license.
Frequently Asked Questions
How much does an electrician cost per hour?
Angi and HomeAdvisor put licensed electricians at $50 to $130 an hour in 2026: about $40 to $60 for an apprentice, $60 to $90 for a journeyman and $90 to $120 for a master. City rates tend to be higher than rural rates.
How much does it cost to hire an electrician just to come out?
Many electricians charge a service call fee. Angi and HomeAdvisor put it at $100 to $200 for the first hour. Ask whether that fee is credited toward the repair.
How much should an electrician cost for a small job?
Angi puts a minor job at $150 to $600. Many electricians also have a minimum of one to four hours of labor, so grouping several small fixes into one visit gets more done for that minimum.
Do electricians charge more for emergencies?
Yes, in most cases. HomeAdvisor says after-hours work runs time-and-a-half to double the standard rate, and Angi says emergency visits can cost double. We take 24/7 emergency calls; see our emergency electrician page.
Is the permit fee included in an electrician’s quote?
It depends on the contractor, so ask. In the City of Abilene, the minimum electrical permit fee is $75, and a new or upgraded service up to 200 amps is $100, according to the City’s fee schedule.
Get a Free Estimate in Abilene
For a price on your job, call (325) 326-5306 or use our contact page. We work in Abilene and the nearby towns, including Dyess AFB, Tye, Merkel, Clyde, Potosi, Buffalo Gap and Tuscola. Not sure whether a problem needs a pro? See when to call an electrician.
