A home electrical inspection is a check of your home’s electrical panel, wiring, outlets, switches and safety devices to find hazards and worn or outdated parts. The short answer on timing: get one when you buy a home, when the house is 40 or more years old, or after a major renovation, an addition or a big new appliance. That is the guidance from the Electrical Safety Foundation International (ESFI), which also says to have a licensed electrician inspect the wiring if you notice warning signs such as breakers that trip often, flickering lights or switch plates that feel hot.
Much of a home’s wiring is hidden behind walls and covers, which is why an inspection is worth it. The U.S. Fire Administration estimated that about 24,000 residential building electrical fires were reported each year from 2014 to 2016, with an estimated 310 deaths and 850 injuries a year. Below: the three kinds of electrical inspection in Texas, what each checks, what it costs and how to get ready.

Three Kinds of Electrical Inspection
“Electrical inspection” can mean three different things, so it helps to know which one you are getting:
| Type of inspection | Who does it | What it is for |
|---|---|---|
| Home inspection (electrical section) | A home inspector licensed by the Texas Real Estate Commission (TREC) | Reports the general condition of a home for a buyer or seller, using TREC’s standards and report form. It is not a code inspection. |
| Electrical safety inspection | A licensed electrician | A closer look at the panel, wiring and devices, testing, finding the cause of a problem, and planning repairs or upgrades |
| Permit inspection | A City of Abilene electrical inspector | Checks new electrical work that needed a permit for safety and code compliance |
What a Home Electrical Inspection Checks
In Texas, licensed home inspectors follow TREC’s standards of practice for electrical systems. The rule splits the electrical system into two parts.
Service entrance and panels. The inspector reports as Deficient problems such as:
- A panel with less than 36 inches of clear space in front of it, or one that is hard to get to.
- A panel in an unsuitable spot, such as a closet or bathroom, or where it can be damaged.
- Missing or damaged covers, including the dead front that hides the wiring, and wires not protected from sharp metal edges.
- Problems with grounding or bonding, breakers that are not compatible with the panel, or a missing main disconnect.
Branch circuits, outlets, switches and fixtures. The inspector has to manually test the smoke and carbon monoxide alarms they can reach and report the type of wiring used for the branch circuits. They report as Deficient:
- Missing GFCI protection in places such as bathrooms, garages, outdoors, kitchen countertops, laundry areas and within six feet of a sink, tub or shower, plus GFCI devices that do not work. Our guide to a GFCI outlet that keeps tripping explains how these devices work.
- Missing AFCI protection in living areas such as kitchens, bedrooms, family and dining rooms, closets, hallways and laundry areas.
- Outlets less than five and a half feet above the floor that are not tamper resistant.
- Outlets with no power, reversed polarity or grounding problems, missing cover plates, and improper use of extension cords.
- Aluminum branch circuit wiring found in the panel without the right connections. If your home has older wiring, see our guide to types of wiring in old houses.
- Missing smoke alarms in bedrooms, outside sleeping areas and on each story, and missing carbon monoxide alarms outside sleeping areas when the home has fuel-burning appliances or an attached garage that opens into the house.
What a Home Inspector Does Not Have to Do
The same rule lists things a Texas home inspector is not required to do. They do not have to work out whether your electrical service has enough capacity now or for the future, operate breakers, remove covers they judge to be hazardous, inspect low voltage wiring, or test AFCI devices in an occupied home if that could damage your belongings.
Two more points are worth knowing. First, the TREC property inspection report form says the inspection is not an inspection to verify compliance with any building code, and TREC’s article for consumers says the standards “do not require inspectors to inspect to today’s code.” Second, the same form explains that some conditions that met the codes in effect when the home was built can still be marked Deficient when they are considered hazardous by today’s standards and the chance of injury or property loss is significant. Its examples include missing or faulty GFCI and AFCI devices, a lack of electrical bonding and grounding, and a lack of bonding on gas piping, including corrugated stainless steel tubing (CSST).
So an older house can come back with electrical items marked Deficient even if it met the rules when it was built. Treat that list as a to-do list to sort by risk, not a verdict, and if the report says an item should be evaluated by an electrician, get that done before your deadlines run out. Our guides on when to replace an electrical panel and electrical panel upgrades explain what usually comes next.
When You Need an Electrical Inspection
- You are buying a home. ESFI recommends an inspection for new owners of a previously owned home. A Texas buyer’s home inspection covers the electrical system, and you can bring in an electrician for anything the report flags.
- Your home is 40 or more years old. That is ESFI’s age line. Older homes may have original panels, ungrounded outlets or wiring types that need a closer look.
- You remodeled, added on or installed a major appliance. ESFI also recommends an inspection for homes 10 or more years old after a major renovation, an addition or a major new appliance. If you plan to add something like an EV charger or a new 240-volt circuit, an electrician can check whether your panel has room for it before the work starts. See our electrical installations page.
- You notice warning signs. ESFI lists breakers that trip often or fuses that blow often, dim or flickering lights, flashes or sparks, sizzling or buzzing sounds, a smell of hot insulation, switch plates or outlet covers that are hot or discolored, any shock, even a mild tingle, and wire insulation that is cut, broken or cracked.
- Someone asks for one. If an insurer, lender or buyer asks about your panel or wiring, get their request in writing so the visit covers it.
If you smell burning, see smoke or a panel feels hot, do not wait for an inspection. If there is smoke or fire, get everyone out and call 911. For an urgent electrical problem without fire, call an emergency electrician.
How Much Does an Electrical Inspection Cost?
According to Angi’s electrical inspection guide (updated Aug. 1, 2026), standard electrical inspections that check wiring, outlets and circuit breakers typically range from $100 to $200, and a full home electrical inspection averages around $350, with larger homes costing more. Angi says in-depth infrared inspections can add about $250 on average.
These are national figures, not Abilene quotes. A buyer’s general home inspection is a separate service with its own price. If the inspection turns up repairs, our guide to electrician costs explains how labor and permits add up. We offer free estimates, and with upfront pricing you approve the price before any work starts.
Permits and City Inspections in Abilene
The City of Abilene’s Building Inspections FAQ says a permit is required to alter, convert, install, repair or replace electrical systems. Inspections are scheduled through Planning and Development Services at 325-676-6232 or in the city’s MyGov portal. The city describes a construction inspection as a visual check of the work for structural integrity, safety and code compliance.
Who pulls the permit matters too. The city says electrical contractors need a state master electrician license, a state contractor license, at least $300,000 in liability insurance and a city credential. Homeowners can do their own electrical work on their homestead only after showing proof of a homestead exemption, passing the city’s homeowner electrical test and getting the permits and inspections.
Statewide, the electrical code changed recently. The Texas Department of Licensing and Regulation adopted the 2026 National Electrical Code as the state electrical code, effective September 1, 2026, with a limited exception for GFCI requirements on certain outdoor outlets.
How to Get Ready for an Inspection
- Clear the space in front of the panel. Texas home inspectors report panels without 36 inches of clearance in front of them.
- Make everything easy to reach: the attic hatch, garage, outdoor outlets and any shop or outbuilding with power.
- Write down what you have noticed, such as a breaker that trips or a dead outlet, and when it happens.
- Find permits or invoices for past electrical work, such as a panel replacement.
- Leave the inner panel cover on. Opening it is a job for the electrician.
When the report comes back, deal with anything involving heat, burning smells, sparks or shocks first, then work through upgrades such as GFCI and AFCI protection and smoke alarms.

Frequently Asked Questions
Do home inspectors check electrical systems in Texas?
Yes. TREC’s standards require licensed inspectors to inspect the service entrance and panels and the branch circuits, outlets, switches and fixtures, to test the smoke and carbon monoxide alarms they can reach, and to report deficiencies on the TREC report form.
How often should you get a home electrical inspection?
ESFI ties it to events rather than a calendar: when you buy a previously owned home, when the house reaches 40 years old, or after a major renovation, addition or new major appliance in a home 10 or more years old. Get one sooner if you notice warning signs.
Can a house fail a home electrical inspection?
A Texas home inspection does not give a pass or fail grade. The TREC report marks individual items as Deficient. A city permit inspection is different, because it checks whether new permitted work meets the code.
Is a home inspection the same as a code inspection?
No. The TREC report form says the inspection is not meant to verify compliance with any building code. Code compliance for new work is checked by the city when the work is permitted.
Need an Electrical Inspection in Abilene?
If you are buying an older home, planning a big new circuit or seeing warning signs, call (325) 326-5306 or use our contact page. Our licensed electricians work under a Texas electrical contractor license, we take 24/7 emergency calls, and we work in Abilene and the nearby towns, including Dyess AFB, Tye, Merkel, Clyde, Potosi, Buffalo Gap and Tuscola.
